When you’re remodeling your Kitchen Cabinet Chino, the cabinets are one of the first things you think of. However, a lot of people don’t even consider changing their cabinets until they realize that they’re not functional or aren’t made properly. It’s an easy fix and can make your kitchen look much more modern and updated!

Step 1: Measure the height of the cabinet.

Measure the height of the cabinet. You’ll want to measure from the bottom corner of your cabinet to its top, marking it with a pencil.

Measure the height of each shelf individually. Measure from one side of your cabinet to another, marking each measurement with a pencil as well.

Measure how far apart each shelf is from other shelves using your tape measure (or just count them).

Step 2: Purchase plywood

Next, you’ll need to purchase some plywood. The best kind to use is at least 1/2 inch thick and large enough to cover the cabinet with about 1/4-inch overlap on all sides. You can also buy pre-cut pieces of wood instead of having it cut at the store since this will make things easier for you later on when it comes time to install your new backsplash.

Step 3: Sand the plywood.

• Sand the plywood.

After you have cut and sanded all of your new shelves, it’s time to move on to the next step: sanding. To do this, you will need a few different grits of sandpaper–120-grit for rough work and 150-grit for final smoothing. The first thing you’ll want to do is run over the edges with 120-grit paper to make them nice and smooth, so they don’t catch on anything else later in the project. Then go back over each piece with 150-grit paper until they’re completely flat again (and preferably just a bit smoother than before).

Step 4: Measure for new shelving

• Measure the space between the cabinets.
• Measure the height of your cabinet and add 2 inches to that measurement. This will be used as a guide for purchasing new shelving.
• Measure the width of your cabinet, then subtract 1 inch from this number (this is so that there’s enough room to slide in a piece of sheet metal).
• Finally, measure how deep each shelf goes into its respective cabinet (usually around 3 inches).

Step 5: Attach the new shelves to the cabinet.

Now it’s time to attach the new shelves. Make sure they are level and in the right place, then secure them firmly with screws or nails.

Cabinets are easy to change and make them more functional.

• Cabinets are easy to change and make them more functional.
• Cabinets can be changed to suit your needs, whether that means painting or staining them or adding extra storage space for pots and pans.
• The best way to customize your kitchen cabinets is by modifying them so they fit into the style of your home better than they did before.

Conclusion

And that’s it! You can now enjoy your new, more functional cabinets.

It’s easy to see why these cabinets are so popular: they’re quick and inexpensive to install, they make a big difference in how much space you have in your Kitchen Cabinet San Juan Capistrano, and they look great too. If you have any questions about this project or want some help planning out the details of your own renovation project, don’t hesitate to visit this article by Mr. Cabinet Care.